The Apple HomeView made its debut over a month ago, and the folks over at iFixit have now performed their signature teardown test. The teardown revealed a surprisingly difficult-to-repair design, even for Apple standards.
Right from the jump, the HomeView’s aluminum chassis made the display disassembly pretty difficult by dissipating heat. The iFixit host describes the adhesive around the screen as much tougher glue compared to other recent Apple products.
Ripped speaker connection cables (iFixit)
And the troubles only continued from there; the connection cables to the speakers were drenched in heavy amounts of glue and ripped when disconnecting. Other key components are held in place using different screw formats ranging from Torx to Phillips #00. The motherboard was held down with an excessive amount of thermal adhesive.
HomeView motherboard front and back (iFixit)
Once the motherboard is removed, we can see a clear shot of the Apple A18 chipset alongside the 8GB of SKHynix LPDDR5X RAM and the 64GB Kyoxia NAND flash module. From then on, there is a lot more adhesive under the antennas and speakers, which takes ample amounts of force to pry out.